|
All Plugins:
| Show 10 Most Recent | Show 50 Most Recent | Show 100 Most Recent | Search Plugins |
| Show Most Popular | Show My PWNED! Plugs | Effects:
| Show All Effects |
| Amplifier | Analyzer | Compressor | DeEsser | Delay | Distortion |
| EQ | FFT | Filter | Gate | Granular | Modulation |
| Multi | Other | Pitch Shifter | Reverb | Spatializer | Instruments:
| Show All Instruments |
| Ambience | Analog | Bass | Beat Slicer | Chip/LoTech | Drum |
| Frequency Modulation | Granular | Other | Phase Distortion | Physical Modeling | Sample Based | |
 |
A recent forum post by blatanville:
ah, well, just a thought...good luck finding it!
Read More... |
| |
 this is a beta version of a synth i´ve build with Synthmaker.
i will post a feature list when the plugin is finished.
the variety of sounds you can create with it is very limited atm,
but if you like to test the beta version here it is:
for downlad you must register or login
say thx to the programmer or use the Thank you Buttom
|
| PWNED! By: ash, Sergio, hermesbombay, pabur, PassTheChalice, MonstarrBeatz, djlalud |
|
| |
 - PsYbAsSyX -
is made for Instantaneous Full-on bass lines !
Draw live sequences or let the synth do the job ...
|
| PWNED! By: newlife, Havt, Devratt, dj romul, mana, Overdose, 2ply, suncry, andreinomente |
|
| |
 -microrock- is physically modelled mono bass with filters, distortion, overdrive and chorus. Some "fake" guitar sounds are possible too.
|
| PWNED! By: atomic_afro, nirvana17, blatanville, Jhopf124, gts4, refreshoner, jokerdrago, hugol, clash, manolostaylo, LPx, andreinomente |
|
| |
 A small and versatile bass-line module.
The bass module is a morph between sample playback and a synthesizer. Original string excitation is sampled, and then sound is modeled.
Playing chords will add extra fat rumble, like when playing a real bass guitar.
Bass guitar range was artifically extended up and down, so that higher notes and parts can be played as well.
Bass module is very CPU lightweight. It will never stick notes, and never break the sound or click during live performances. |
| PWNED! By: arke, blatanville, MarsHottentot |
|
| |
 Aggressor is a monophonic synthesizer, which can be used as a VST instrument. The synth was specifically designed to produce aggressive bass- and lead-sounds where special attention was paid on the ability to authentically emulate the typical sound of the famous TB-303. The architecture is based on the classic VCO-VCF-VCA structure where each of the building blocks goes far beyond the typical implementation of bassline synths. |
| PWNED! By: blatanville, ghengisrob, brand0 |
|
| |
 Analog Warfare is a Triple Osc VSTi Bass Synthesizer for Windows.
It features phase distortion modelled oscillators, ring modulating, 2 LFO's, 3 state variable filters, 2 BPM synced double multi mode filter delay's ... and so much more! |
| PWNED! By: blatanville |
|
| |
 Not every plug need to be big.
It does what it does - basses |
| PWNED! By: blatanville, nathel, martygras, Ezmyrelda |
|
| |
 B-station is a simple but powerfull bass plugin.
It has 3 oscillators.
Every oscillator has a fine tune/octave/pw/volume and 5 different waveforms.
A mod oscillator for Pulse width and for phase modulation.
there 4 differnt filters types
Lowpass/bandpass/hipass/and a 4pole
the filter has an envelope ADSRLT 12 curves and a BPM lfo
a modulation Envelope for the pitch and Pulse width
A simple Vibrato
bitcrusher
drive
low and hi boost
a arp
Velocity filter and volume on/off
glide /Retigger and a master volume
32 preset i made and a extra bank made by sinkmusic |
| PWNED! By: blatanville, gizky, GleBka, Ezmyrelda |
|
| |
 A simple drum n bass friendly bass synth. |
| PWNED! By: mysterwild |
|
| |
 Bazz-ID is a little synth in Vsti format and based on FM synthesis.
It's some kind of Bassline synth with 3 Bass level.
It use 3 FM generator:
the first for the High,
the next for the the Bass and Sub-Bass
and the last for Medium.
requires pluggo runtime. |
|
| |
 Cetone033 is a simple bassline synthesizer. Its code ist based on some code examples from musicdsp.org.
Specifications:
2 Oscillators with Saw, Pulse and Triangle waveforms. Morph parameter controlls either pulsewidth or Triangle-to-Saw morph value.
2 Envelopes with attack and decay times from nearly zero up to one second.
Resonant Butterworth 24db filter |
| PWNED! By: blatanville |
|
| |
 A free, monophon VST synthesizer with a sound production identical with reFXs' BEAST with the difference that Claw has only one oscillator (BEAST has four).
Features highlights:
One oscillator with PWM
Basis-feature for ping-pong effects
Build in distortion and delay
32 ready to go presets included
Very easy to use |
|
| |
 PhilterPlugs Color Synth
features:
6 Osc´s
Detuner
Amp Envelope
Tremolo
Vibrato
Portamento |
| PWNED! By: Hempstapimp |
|
| |
 One of the best 303 emulations, now even better and for everybody.
|
| PWNED! By: atomic_afro, William Fetter, blatanville, GleBka, AniX, amiga909, Impalaboy |
|
| |
 Creakbox Bassline is a mono synth with a built in sequencer. It has a 5 octave range and sounds very much like a killer little box many try to duplicate. |
|
| |
 DaHornet is a virtual simulation of the WASP synth, which offers up a wide assortment of great bass sounds. It is one of the rare VSTi's that includes MIDI-learn, and a random-patch generator. DaHornet used to be a commercial product, but is now free to download, and the registration serial number is given on the download page. |
| PWNED! By: blatanville, MarsHottentot, GleBka, salty dog, shamanix |
|
| |
 PhilterPlugs Deep Throat Synth
Features:
-Complex FM Synth (FM and SelfFM)
-Modulator/Carrier Selector
-Detuner
-2 FM Operators
-2 FM Envelopes
-Amp Envelope
-State Variable Filter
(HighPass,LowPass,BandPass,BandReject,Peaking)
-LFO (Sine,Saw,Triangle,Ramp,Square)
-Preset Manager
-Monophon / Polyphon Mode
-Max. Polyphony 16 Voices
-Portamento
|
| PWNED! By: blatanville, bagigetto, Hempstapimp |
|
| |
 Dream Sequencer is for Producing those simple deep bass sequences of the 70's as produced by Tangerine Dream etc. The VSTi synchronizes with the host bpm and takes its root key from a "midi note" and plays for the duration from "note on" until "note off". |
| PWNED! By: robojam, MarsHottentot, nathel |
|
| |
 - 24 bass sound (acoustic & synth)
- Master section (level, pan, fine)
- Amp. envelope
- Velocity response |
| PWNED! By: blatanville, nathel |
|
| |
 Genobazz is a free monophonic bass synthesizer plugin, designed to be simple to use, for all your bass need.
Features:
- 8 Waveforms: saw, square, pulse, double sine, saw-pulse, reso1, reso2 and reso3
- 6 Filter types: Fat low pass, 24dB low pass, VCF Ladder, Modulo low pass, 36dB State Variable, Fat filter
- Full MIDI automation and MIDI learn on all parameters
- Integrated Patch manager
- 23 Factory sound presets
- Note play mode control
- Easy installer |
| PWNED! By: Mika |
|
| |
 Genobazz is a free monophonic bass synthesizer plugin, designed to be simple to use, for all your bass need, from simple sine bass to acid bassline.
Feature highlights
- 8 Waveforms: saw, square, pulse, double sine, saw-pulse, reso1, reso2 and reso3
- 7 Filter types: Fat low-pass, 24dB low-pass, 24dB VCF Ladder, Modulo low-pass, 36dB State Variable, Fat filter, 12dB High-pass
- Full MIDI automation and MIDI learn on all parameters
- 2 Waveforms modulation types
- Sub amplification boost
- Integrated Patch manager
- Knob reset on initial patch value
- Randomize knobs position
- 32 Factory sound presets
- Note play mode control
- Easy installer |
|
| |
 * Designed as a bass synth, can also be used for many different synth and percussion sounds.
* Phase distortion oscillator, two wave selectors with eight waveforms each and modulation depth. Sub, bass and normal octaves.
* Can be altered by one of sixteen different preset waveshapers.
* A seperate sub osc can be set equal to or one octave lower than the main oscillator and can enter the signal chain pre or post filter.
* Two filters: Moog type and Low pass. Variable envelope amount with controls for attack, decay and sustain.
* Amp section with control of attack, decay and sustain.
* Audio trigger section consists of only two knobs, (Gate) which sets the gates strength (Decay) which sets the gates time re-trigger. (Please read the manual)
* 128 presets to get you started. |
| PWNED! By: MarsHottentot, nathel |
|
| |
 * Designed as a bass synth, can also be used for many different synth and percussion sounds.
* Phase distortion oscillator, two wave selectors with eight waveforms each and modulation depth. Sub, bass and normal octaves. The envelope switch in the oscillator sends the filter envelope to the oscillator depth control.
* Can be altered by one of sixteen different preset waveshapers.
* A seperate sub osc can be set equal to or one octave lower than the main oscillator and can enter the signal chain pre or post filter.
* Two filters: Moog type and Low pass. Variable envelope amount with controls for attack, decay and sustain. Velocity control affects the filter cutoff and controls the oscillator depth.
* Now includes a Compressor.
* Now includes a switchable 3 band equalizer.
* Amp section with control of attack, decay and sustain. Velocity control affects the output level.
* Audio trigger section consists of only two knobs, (Gate) which sets the gates strength (Decay) which sets the gates time re-trigger. (Please read the manual) The synth may be triggered by audio or MIDI using the A|M switch in the trigger section.
* 64 presets to get you started. |
| PWNED! By: MarsHottentot |
|
| |
 Simple mono bass synth using Karplus frequency modulation. Features a sub-oscillator with custom waveforms written using the code component. |
| PWNED! By: blatanville |
|
| |
 Here's the rebirth of the infamous Mainliner, designed specifically for big nasty dnb basslines. Twice, no thrice, as good.. 3x3 oscillators, 3 LFOs, 3 EnvGen, 2 Filters, FM, HardSync, shiny gui. Pile on the pulsewaves, detune to all buggery, slap over an 8-pole LPF and hoov away, sunshine. |
| PWNED! By: robojam, aymat, NunoCouto |
|
| |
 miniBoom - small, and easy-to-use rompler giving a deep sub bass, several timbres. |
| PWNED! By: Impalaboy |
|
| |
 2 Oscillators monophonic synth, good for basses. |
| PWNED! By: blatanville, arkmabat |
|
| |
 monomate is a monophonic synth designed to create retro sounding basslines and shrill leads. version 2.1 brings a new phase adjustable wave mix, the ever popular randomizer, and a nice knob for octive selection. |
| PWNED! By: blatanville |
|
| |
 NWBass is a free classic mono bassline synth.
Features:
- analogue modelled high quality oscillators with 2 waveforms (saw and square)
- unique filtersound with 3 selectable characteristics
- filter envelope
- velocity sensitive accent
- note slide
- full MIDI controll with MIDI learn function
- interpolated controlls
- parameter finetune via right mouse button
|
|
| |
 A cross between a 303 BassLine with A Casio CZ-101.
|
|
| |
 ProjectX1 is a hybrid bass synth utilizing subtractive,fm,phase distortion and unison synthesis. It's essentially a monophonic
synth but has a pseudo stereo mode also and features 2 filters,2 adsr's,mod envelope generator,2 modulation matrix's with 24
possible destinations each and the source signals can also be inverted. |
|
| |
 PsYbAsSyX
is made for Instantaneous Full-on bass lines !
Draw live sequences or let the synth do the job ... with a nicer GUI now !!! |
|
| |
 Hotelsinus Reese Bassline is The Word's First Drum and Bass "Reese" and Dubstep Bass Instrument at the moment. And it's Free! This VSTi can reproduce the famous sounds of Legendary DnB Artist's Best. Bass Sounds. Now you can put it to your music for free and no need to RIP other artists Bassline samples.
- This instrument can create wide variety of sounds, like Hard Bass, Dark Background Atmosphere and ofcourse REESE! |
| PWNED! By: blatanville, aymat |
|
| |
 ritual is an analog style bass synthesizer that uses several unique techiques to create a thick & rich sound. oscillator 1 is a blend of a pulse & crushed triangle, while oscillator 2 uses a custom designed super-saw blended with a crushed sine. the synthesizer also uses a custom designed cascade filter system with a feedback chain for adding analog warmth to the sound. lfo and envelope modulators can target 8 different parameters in both positives and negatives using the modulation matrix. |
| PWNED! By: blatanville, MarsHottentot, MIDIManNI |
|
| |
 Think Ol' Skool Detroit, Roland TB-303™, Radioshack Electronics Learning Lab™, and a half-dead 9V battery, meets the underground technology from a dark civilization of the distant future. (use your imagination.)
Rogue™ is a raspy, fried transistor, dropped on the ground a couple of times, bass/lead VSTi based on the slightly overdone subtractive synth concept. But what makes it unique is its ability to fry its own output in a lovingly controlled manner making it so much fun to play, you may not even notice it's just a bunch of saw (or square) waves being sent through a couple of lowpass filters. |
| PWNED! By: MarsHottentot |
|
| |
 Seeq One has 5 sequencers
1 for notes and otaves but can also be used for filter/Pulse Width/resonance or Phase modulation
there are 2 sequencer that uses an envelope decays
mainly for cutoff and oscilator pitch
but also for pulse width and phasemod or resonance
1 "normal" sequencer (no decay fx) can also be used for the same destinations
and a Gate sequencer with mix option
there are 3 oscillators with
sine/saw/ramp/pulse
and triangle
octave/note and fine tune for all of them :)
there are 5 different filters
low/hi/band/4pole/8pole
and a filter enelope with attack decay sustain and level
there is a extra oscillator for the fm pm and pw
there are 2 LFO`s =)
2 decay FXs
left and right delay
glide and soft distortion
64 presets |
| PWNED! By: blatanville |
|
| |
 Roland SH101 Emulation |
| PWNED! By: MarsHottentot, martygras |
|
| |
 Silver Bass is a simple analog synth for making Drum&Bass, Hardcore, and Dub basslines but is also useful for making classic rave stabs. |
| PWNED! By: InsaneCowBoutique |
|
| |
 Skatcat is a 2-voice synth with unison, pitch and filter envelopes. Powerful sound. |
|
| |
 The LANSTARR.COM STARRSYNTH 3.0 is an analog-style virtual synthesizer with a serious attitude problem! If you are looking for a synth for creating soft atmospheric and swirling pads, this is not the synth for you (in that case, look at our ELEPHO synth). However, if you are looking for an aggressive synth for creating offensive leads and dominating basslines, as well as out of this world synth effects, then you should definitely check out the new and improved STARRSYNTH 3.0. |
| PWNED! By: Taylor-made, arkmabat |
|
| |
 subfreak is a very simple 2 Osc synth for creating low down and dirty sub bass
It's designed for those who don't want or need lots of controls, hence only 3 things to change
Just play your notes a couple of octaves below middle C for that deep subby hum change the waveform of Osc 2 to add a little grit
|
| PWNED! By: MarsHottentot, Impalaboy |
|
| |
 With Synthetic Bass Basic you can play a good sounding e-bass emulation. Synthetic Bass Basic features ADSR volume envelope, ADSR filter envelope, 8 waveforms, fake aftertouch slap (controlling Filter Delay Amount), Portamento (Midi Pitchstick right), Cutoff and Resonance Amount |
|
| |
 TAL-BassLine is a virtal analog bass synthesizer especially made for bass, acid sounds and effects. It’s based on a robust core and has the usual controls of analogue hardware synthesizers.
A unique -18dB low pass filter with a lot of asymmetric and random components introduce a warm and analogue sound. Very fast, non linear envelopes are also a part of this synth.
Bandlinited oscillators (saw, pulse).
Sub-oscillator: square -1 oct., square -2 oct., pulse -1 oct, pulse -2 oct.
-18 dB/octave low-pass filter (resonant/self-oscillating).
LFO (frequency: 0,1 .. 30 Hz, waveforms: sin, tri, saw, rec, noise).
Very fast nonlinear envelope (A: 1.5ms..4s, D: 2ms..10s, S: 0..100%, R: 2ms..10s).
Simple Arpeggiator (up, down, one octave mode).
2x Unisono Mode.
Panic button.
MIDI automation for all sliders and pots.
Precise fader control while holding down the "Shift" button.
Supports all sample-rates.
2x oversampling.
23 presets.
Tutorial pdf.
~2.5% CPU (Intel Core 2 CPU 6700, 44.1KHz, 24Bit, buffer-size 1024 Samples). |
| PWNED! By: William Fetter, blatanville, robojam, 133crazydirector, jodeum, Auan, BroderYon, shamanix, snez, Opp33 |
|
| |
 Virtual recreation of famous bass pedals from 70's. Prepare for earth shattering bass! |
| PWNED! By: atomic_afro, arke, blatanville, MarsHottentot, West, nathel, martygras, BroderYon, shamanix |
|
| |
 This synth was a collaborative effort produced by the SynthMaker forum members. It's an emulation of the popular Roland TB-303 synth. This has a single oscillator (sawtooth or square) wave and use a simple envelope generator with decay control only. There's also a low pass filter is also with -18 dB per octave attenuation. |
| PWNED! By: blatanville, nathel |
|
| |
 A single oscillator bass synth with an 8 step sequencer. |
| PWNED! By: nathel |
|
| |
| TB4005 - bass synth VSTi coded by Joachim ( JoaChip - great coder of some great buzz machines ) |
|
| |
 VSTi Bassline Synthesizer
Specifications:
- 3 Sawtooth Oscillators
- Detuning for 2 Oscillators (Spreading)
- 1 Sawtooth Suboscillator with a range of 1 or 2 octaves
- Lowpass Filter
- Simple Sound Equalizer (soft/hard)
- Master-Section
- Clipping-Section |
| PWNED! By: blatanville, arkmabat |
|
| |
 Digital bassline synth. |
|
| |
 VSTi Bassline Synthesizer
Specifications:
- 1 Sawtooth Oscillator
- 1 Square Oscillator
- Coarse with a range of 7 octaves
- Phase setting for each oscillator
- ADSR Envelope (VCA)
- ADSR Envelope (VCF)
- Lowpass Filter
- Master-Volume |
| PWNED! By: blatanville, arkmabat |
|
